Rev 1404 | Rev 1416 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed
DIN Is Noise 44 @ Chennai, India
!+! new noise generator in DIN Is Noise!
+ using drone UI
+ choose if a drone drones a pitch or makes noise
+ Menu > Drone Tools > Drone is Drone OR Drone is Noise
+ OR SHIFT + q
+ when a drone makes noise:
+ a low frequency 'drone' makes low frequency noise
+ a high frequency 'drone' makes high frequency noise
+ manipulate drones ie move, modulate, launch, orbit to
manipulate noises!
+ choose Menu > Editors > Noise Interpolator to
+ edit the noise sample interpolator curve
+ use drone pendulum's parameters to turn rows and/or columns
of a drone mesh into drone pendulums! :)
+ works best when you make all drones of the mesh at the same time
+ so set In seconds to 0
+ and make drones in:
+ ascending or descending rows
+ ascending or descending columns
+ apply to AM BPM and/or FM BPM to turn rows and/or columns of drone
mesh as drone pendulums!
+ harmonic bookmarks on Sine Mixer
+ click on + to bookmark selected harmonics
+ click on - to delete selected bookmarks
+ click on x to delete all bookmarks
+ click bookmark to select harmonics linked to it
+ SHIFT click to select more bookmarks
+ flip button to flip start/end bpm of drones in drone pendulum
+ rearranged menu items on Drone Params
+ brought drone AM depth and FM depth together
+ brought drone AM BPM and FM BPM together
+ moved Rotate and Scale drones to Drone Params tab from Drone Tools tab
+ DIN switches menu to:
+ Drone Params when drones selected
+ Voice when Voice is enabled
+ Ranges when a range is selected
+ press ESC to abort active octave shift on current instrument
+ new microtonal keyboard shortcuts:
+ SHIFT + f selects range under cursor
+ CTRL + f to switch between change note to note and change note by octave
+ CTRL + v to change both notes (to another note or by octave) of current range
+ CTRL + g to change left note (to another note or by octave) of current range
+ CTRL + h to change right note (to another note or by octave) of current range
+ SHIFT + b to change height of current range
+ CTRL + b to change height of entire microtonal keyboard
+ press g to toggle draw cursor guide on curve editors
+ useful for aligning curve components
+ activate with keyboard shortcut only, may appear on menu in future
* improved turn and speed ball operator on Mondrian
+ using new noise / random algorithm!
* improved bezier curve generation
* improved expression evaluation in numeric fields
* improved warper default curves
* improved waveforms library
! fixed bug: DIN may crash when deleting a vertex of curve that has point modulation !
! fixed bug: make absolute values of a binaural pair available for editing
when selection changed from multiple pairs to one pair. !
! fixed bug: num pad + and - to change slit size on Mondrian !
! fixed bug: non decaying notes when ball volume < 0 on Mondrian !
! fixed bug: in display of Selected Range number on Microtonal Keyboard!
! fixed bug: reposition drones when left note of first range, right note of last range changed !
! fixed bug: in 2600 patch !
! fixed typo: paris instead of pairs in binaural drones instrument !
DIN Is Noise 43 @ Chennai, India
+ move groups of harmonics on sine mixer
+ shift + click harmonic on sine mixer to select / deselect
+ moving one of the selected harmonics moves all the selected harmonics
'But then one lizard (or iguana) moved, and all moved'
- VS Naipaul, Among the Believers
+ but shift when moving moves just the selected harmonic
+ all, none, invert buttons for gross selection
+ resize phrase position slider
+ DIN saves/reloads slider
+ change both notes of selected range using mouse slider
+ Use Menu > Ranges > Change note? > Both
- removed Change Left note, Change Right note menu items in Menu > Ranges
+ replaced with Change note? Left Right Both menu items
+ scrub / scratch point modulations
+ click on Scrub and move up or down
+ Sync on Point Modulator
+ workflow is
+ select modulations
+ pause
+ sync
+ play
+ voice volume minimum can be < 0 [voice waveform flips]
+ spinner to set absolute drone master volume
+ drone master volume can be < 0 [drone waveform flips]
- removed mute drones button
* just spin drone master volume to 0
+ save/load auto apply state on sine mixer
+ save/load drone selection state
+ save/load drone frozen state
+ save/load plugins fold state for each curve editor
+ save/load auto select launched drones flag
+ turn on/off UI in all screens, not just in instruments
* optimised
+ click repeat of Apply button and key repeat of shortcut r for continous apply
of plugin output to curve
+ useful/interesting when point modulating custom sin/cos/radius curves etc
+ drones per minute is floating point instead of integer
* improved phrase handling for voice on microtonal keyboard
* improved plugin browser on curve editors
* changed default drone handle size to 3
! fixed bug: turning on/off ui on point modulator may crash DIN42 !
! fixed bug: pressing shift/ctrl effected selection box when not previewing mesh !
! fixed bug: changing parameters on Number plugin didnt update preview !
! fixed bug: frozen drones saved to disk thawed on reload !
! fixed bug: didnt save/load turns on spiraler !
! fixed bug: rotate/scale of drones happened in UI loop, now moved to audio loop !
! fixed bug: stopped gravity editing when menu displayed !
DIN Is Noise 42 @ Chennai, India
Dedicated to Dad, Mr Narasimhan Sampath [06-10-1943 >> 16-04-2019]
+++ Point Modulator on all curve editors, new for DIN42 +++
+ modulate any point on any bezier curve along horizontal (ie X) and
vertical (ie Y) axis over BPM
+ eg., when done on a waveform, leads to timbral modulation, look @ the FFT :)
+ try on shapeforms too!
+ try on decays, delay feedback and volumes, pitch and range modulation
curves etc etc!
+ to modulate, click on the + button on the Point Modulator panel
+ now pick a point on curve (any vertex or tangent) to modulate
+ DIN draws a dotted line joining a state button to the point on curve
+ nothing is modulating yet
+ change X depth to modulate the point along horizontal axis over BPM
+ the point should start moving along the horizontal
+ change Y depth to modulate the point along vertical axis over BPM
+ change X BPM and Y BPM to change the rate ie speed of modulation of the point
+ when more than one point is modulating,
+ click on None to deselect all modulating points
+ click on a point's state button to change modulation params for just that point.
+ use the X depth/BPM, Y depth/BPM spinners to change the params
+ use All, None and Invert to select more than one state button and thus more than
one point.
+ use the X depth/BPM, Y depth/BPM spinners to change params for selected points
+ press play button to toggle point modulation of selected points
+ press kill button to kill point modulations of selected points
+ point modulations are saved [and loaded] to [from] disk :)
+++ Captures - mouse capture panel on all curve editors, new for DIN42 +++
+ play, pause and kill captures
+ To record a mouse capture, position mouse on the curve item
that you want to assign the mouse capture, choose Menu > Mouse capture > Start,
move mouse as you please and click or ESC to finish.
+ To assign the mouse capture, choose Menu > Mouse capture > Assign and pick
the curve item to assign the mouse capture. You can assign the same mouse
capture to other items by repeating the same.
+ mouse capture is *not* saved to disk [maybe in a future release]
+ Overlay pitch and volume distrubution on microtonal-keyboard:
+ Menu > Misc > Overlay pitch distribution
+ Menu > Misc > Overlay volume distribution
+ Pixels Per Level
+ more pixels, less acurate rendering of distribution but faster
+ less pixels, more accurate rendering of distribution but slower
+ Default is 5 pixels
+ Mirror whole curve or curve vertex/tangent about Horizontal and Vertical axis
+ Swap 2 curves [experimental, only works on editors with 2 curves]
- removed Close button from Menu
DIN Is Noise 41 @ Chennai, India
+++ non-linear pitch and volume distributon on all microtonal-keybard ranges +++
! until DIN 40, pitch increased steadily from left note to right note on all
microtonal ranges !
! until DIN 40, volume increased steadily from the bottom to the top on all
microtonal ranges !
+ in DIN 41, edit the pitch distribution curve to non-linearly change the pitch
when going left to right in a microtonal range.
+ Menu > Editors > Range Pitch & Volume
+ in DIN 41, edit the volume distribution curve to non-linearly change the volume
when going from bottom to top of a microtonal range.
+ Menu > Editors > Range Pitch & Volume
+ Voice and Drones all pick up changes to range width+height, range pitch+volume curves
+ Press INSERT on microtonal-keyboard to toggle overlay of volume distribution
+ Press END on microtonal-keyboard to toggle overlay of pitch distribution
+++ drone pendulum +++
+ inspired by wave pendulum toy/experiment from physics
+ Menu > Drone Tools > Create drone pendulum
+ click and drag a box to create drone pendulum
+ spacing determines the number of drones made along orientation
+ low spacing = large number of drones
high spacing = small number of drones
+ orientation
+ vertical
+ frequency changes more than volume
+ change FM depth, bpm for interest
+ horizontal
+ volume changes more than frequency
+ change AM depth, bpm for interest
+ press SHIFT or CTRL to square the selection box
+ SHIFT chooses lesser of width or height
+ CTRL chooses greater of width or height to square mesh
+ squaring useful when creating mesh and drone pendulums
+ ESC or Right click from Settings screen to come back to previuos screen
- removed F8 = mouse capture assign and F9 = mouse capture delete
- Please use Menu > Tools > Mouse capture > Assign or Delete
! FIXED: curve picker display !
! FIXED: menu items on curve editor !
DIN Is Noise 40 @ Chennai, India.
+ Wrap checkbutton on Sine Mixer to toggle wrapping of harmonics when sliding them
- always wrapped harmonics until DIN 39
+ defered creation of drones of the drone mesh
- all drones were created at the same time until DIN 39
+ affects their phase so affects their visual modulation
+ visible and audible when you do FM / AM
+ different creation schemes:
+ ascending/descending rows and columns, random, nearest/farthest from various
end points, random and custom point
+ set width and height of all microtonal ranges by sculpting curves range-width
and range-height in the new Range Width & Height editor
+ invoke editor with Menu > Editors > Range Width & Height
+ useful to overlay the microtonal keyboard when on the editor
+ press o or Menu > Tools > Overlay Instrument
+ sculpting the curves is another way to do mircotonal range modulation :)
! automate by assigning mouse capture to points !
+ randomize increment on a value spinner:
+ click on right arrow beside the value field to reveal ~ checkbutton
+ turn increment randomization on/off by clicking on the ~ checkbutton
+ default randomisation of increment is -100% to 100% ie no
increment at all to twice the increment
+ change this value in the field to change the randomisation
eg., 0 100 means increment to twice the increment
+ direction indicators on mouse slider
+ move along indicated directions to change parameter
+ new checkbox Overlay Instrument on all curve editors
+ overlays the current instrument on the curve editor
* changed widgets on the keyboard-keyboard:
* voices attack time, decay time
* can now constrain drone scaling (Menu > Drone Tools > Scale) to horizontal or vertical axis.
* default is uniform scaling along both horizontal and vertical axes
* press SHIFT to scale selected drones along horizontal only
* press CTRL to scale selected drones along vertical only
! FIXED set drone master volume increment to 0.1 !
! FIXED countries plugin preview !
! FIXED drone mesh preview display !
! FIXED fold arrow button color on oscilloscope !
! FIXED no pitch/volume display when cursor on widgets on microtonal keyboard !
DIN Is Noise 39 @ Chennai, India.
+ change left or right note of the current microtonal range
+ change to another note of the scale or any note in tuning
+ using Menu > Ranges > Change left note
+ using Menu > Ranges > Change right note
+ use range picker to pick the microtonal range
+ browse selected drones to pick one
+ DIN hilites picked drone with green cross hairs
+ press LEFT ARROW to pick previous drone
+ press RIGHT ARROW to pick next drone
+ when you reach the end, DIN picks all drones in the original selection.
+ can keep browsing if you like
+ you can apply any drone operation to this picked drone
eg., launch/stop launch drones from this drone and so on.
+ aliter Menu > Drone Tools > Browse Drone
+ snap selected drones to notes
! DIN snapped all drones to notes until version 38a !
+ allows for some drones to snap to notes and others to roam free
+ select a bunch of drones and
+ k to toggle snap drones to notes
+ SHIFT + k to snap drones to notes
+ CTRL + k to unsnap drones from notes
+ aliter Menu > Drone Params > Snap drones to notes
+ Set, Unset and Toggle
+ use Snap Left and Snap Right to determine how drone snaps to left or
right note of the microtonal range:
+ eg., if Snap Left = 0.25 and Snap Right = 0.75 drone snaps to left note
if the drone is in first 25% of microtonal range's width, snaps to the right
note if its beyond 75% of the microtonal range's width.
+ eg., if Snap Left = 0.5 and Snap Right = 0.5 too, drone snaps to left note
for the first 50% of the microtonal range's width and then snaps to the right
note for the remaining 50% of the microtonal range's width ie the drone always
snaps to a note.
+ modulation now affects velocity vector of selected drones
+ select a bunch of drones and
+ v to toggle
+ SHIFT + v to let modulation affect velocity vector of selected drones
+ CTRL + v to not let modulation affect velocity vector of selected drones
+ aliter Menu > Drone Params > Modulation Affects Velocity
+ Set, Unset and Toggle
+ added Curve Mix Samples to specify Curve Mix Time in samples
+ allows for very small curve mix times
+ changing this value changes Curve Mix Time and vice-versa.
+ also changes when sample rate changes
+ turns is now floating point (was integer) in spiraler
+ allows for both partial and complete turns eg., 1, 1.25, 1.5, 1.75, 2 turns.
+ press l to toggle label vertices on any curve editor
+ RPM increment is 1.0 on curve editor
* default Curve Mix Time is now 1 seconds
* improved Mirror style of snap drones to notes
* improved drone pitch / volume tagging
! OPTIMISED plugins circler, rose milker, spiraler, sine mixer, lissajous !
! FIXED select attractors from any selection of drones !
! FIXED Record and Clear Phrase in Menu > Voice !
! FIXED labeling of notes on Mondrian when tuning changes !
! FIXED Drone Master Volume display !
! FIXED Gravity tracks snapped x of drone instead of absolute x of drone !
! FIXED default modulation width for all ranges is 0 !
DIN Is Noise 38a @ Chennai, India:
! fixed pitch/volume of suitable drones when range left, right or
height is changed
DIN Is Noise 38 @ Chennai, India
* plugins window on curve editors folded on DIN start.
+ snap drones to notes styles:
+ free - any value on snap left, right
+ lock - snap left equals snap right
+ mirror -
+ if snap left = i, then snap right = 1 - i
eg., snap left = 0.25, snap right = 0.75
+ cosmetics: edit drone arrow depth and width.
+ full microtonal range modulation on microtonal-keyboard
+ modulate width and height of a microtonal range over BPM.
+ start/stop/pause-resume/toggle of modulation
+ affects voice and drones
+ because the pitch/volume the voice and drones point to modulates
+ edit height of every microtonal range
+ or edit height of all ranges
+ set curve mixing time to audio buffer time on Settings screen.
+ shift + i on mondrian toggles label pitch/volume of notes
DIN Is Noise 37a @ Chennai, India on September 21, 2018:
on microtonal-keyboard:
+ SHIFT + l to select all drone launchers
+ SHIFT + j to show/hide pitch volume info of drones
-> moved some menu items from Drone Tools to Drone Params
-> moved some menu items from Drone Params to Drone Tools
+ modulation affects velocity vector checkbox
+ 2 styles of bounce for drones reaching the bottom of the microtonal keyboard:
+ forward - like a bouncing ball
+ back - inspired by alpha particles - Search Rutherford Scattering on Wikipedia.
+ save/restore of snap to notes
+ reset selected drones' velocity vector to vertical
+ reset gravity vector
+ to pointing down
+ optionally keep last size
! fixed adjust range left / right / both to respect limits !
! fixed divide by 0 bug on bouncing drones !
+ taller levels on Sine Mixer plugin for finer control of harmonics levels
* moved FFT display to lower corner of waveform editors
* improved the bezier curve solvers
+ DIN uptime listed in log
DIN Is Noise 36 @ Chennai, India
+ Sync button on settings screen sets same L and R delay times
+ settings screen now on curve editors too
+ mouse wheel on value field of a spinner increments / decrements value
+ velocity heading faces direction of modulation when drone isnt tracking, orbiting
+ adjust board height, range left, right & both using mouse slider from Menu > Misc
or moving under gravity
+ << or >> to shift harmonics on sine mixer. results in apply
+ change height of sine mixer by moving the little button to the right of all harmonics
+ allows for finer change of harmonic level
+ adjust amount that snaps drone to the left or right note of microtonal range
+ default snap to left is 0.5
+ ie drone snaps to left note if its at <= 0.5 of the range
+ default snap right is 0.5
+ ie drone snaps to right note if its at >= 0.5 of the range
! fixed +- position on spinner ui control
! fixed voice, delay, gater buttons response when clicked during fade in/out
! fixed drone response when deleted but is actually fading in
* rearranged menu items: am depth/bpm and fm depth/bpm on Voice and Drone Params,
velocity/rotate-velocity/acceleration on Drone Tools
DIN Is Noise 35 @ Chennai, India
+ Major expansion to Binaural drones instrument
+ See new docs at https://dinisnoise.org/docs/ for details
+ binaural drones now saved with their phase at exit to reproduce sound on restart.
! fixed crash when ball deleted and auto split box wants to split box that had deleted ball
! fixed memory leak when a binaural drone pair was removed
* mark if L or R channel is stronger on oscilloscope with a @
DIN Is Noise 34 @ Chennai, India
+ Pick a box that has a ball to:
+ Auto split box,
+ can be used to trap a bouncing ball
+ Auto delete box
* Slit operations
NEW! F11 to Remove slits on a box that has a ball
NEW! F12 to Remove all slits
+ Label pitch and volume on:
+ Mondrian
+ Microtonal-Keyboard:
* click on i to label pitch/volume on the board and cursor
+ click on j to label pitch/volume of the drones
+ Change Drone Rise (attack) and fall (decay) times:
+ When drone is made or launched:
+ A rise ie attack time is randomly chosen between Drone Min Rise Time
and Drone Max Rise time.
+ When a drone is deleted or killed:
+ A fall time is randomly chosen between Drone Min Fall Time
and Drone Max Fall time.
+ Change times on the Settings screen
! fixed ie disabled moving the oscilloscope when menu is showing
DIN Is Noise 33 @ Chennai, India
+ 5th ball operation :)
+ Transform
+ transforms a ball into an another type of ball or a random type
+ so a bouncer can become
+ a healer
+ a wrecker or
+ a random type ie remain a bouncer, become a healer or a wrecker
+ a wrecker can become
+ a healer
+ a bouncer or
+ a random type ie remain a wrecker, become a healer or a bouncer
+ and a healer can be come
+ a wrecker
+ a bouncer or
+ a random type ie remain a healer, become a wrecker or a bouncer
+ the transform rules are global ie same for all balls
+ does it Every few seconds
+ Mouse wheel to scroll menu items
DIN Is Noise 32 @ Palazzolo Acreide, Italy
+ 4 new ball operations in the Mondrian instrument
+ Apply per ball
+ eg., different balls, different operations
+ Turn
+ randomly turns a ball clockwise or anti-clockwise by some degrees
+ does it Every few seconds
+ Clockwise is max degrees the ball will turn clockwise
+ Anti-clockwise is max degrees the ball will turn anti-clockwise
+ Sync keeps Clockwise and Anti-clockwise same for turning equally likely in both directions
+ Speed
+ randomly speeds up or slows down a ball
+ does it Every few seconds
+ Brake = how much to slow down each time
+ Accelerate = how much to speed up each time
+ Sync keeps Brake and Accelerate same for equally likely speed changes
+ Teleport
+ randomly moves the position of a ball by some distance
+ does it Every few seconds
+ upto a Maximum distance
+ Clone
+ clones the selected ball
+ Offsets it away from the parent
+ Every few seconds
+ upto Max Clones
+ when turned on, Clone can clone too
+ careful, because clone's clone will clone too
+ and its clone will clone too
+ and on
+ and on
+ and on!
+ Max balls keeps cloning under control
+ Or select all balls, wait for the new clones to appear and delete selection.
+ this leaves just the new clones
+ but labor intensive :)
! Use Turn and Speed together to make insect / worm like crawling movements :)
+ "Go to the ant, thou sluggard; consider her ways, and be wise.."
+ Proverbs 6:6-8, The Bible.
! Fixed bug on auto-split box which created full boxes instead of splitting the box when no notes are available to split on.
+ Turn On / Off drawing of ball Position, Heading and Trails
+ Theming of GUI possible by editing globals file
+ on Windows its factory/globals
+ on GNU/Linux its usually /usr/local/share/din/factory/globals
+ on Apple Mac OS X its Applications/DIN Is Noise.app/Contents/Mac OS X/factory/globals
+ PREFIX variable on GNU/Linux allows correct installation on directories other than /usr/local
! DIN Is Noise 31 @ Chennai, India
! RELEASE WITHDRAWN, USE DIN Is Noise 32 !
+ 3 new ball operations
+ Apply per ball
+ eg., different operations on different balls
+ Turn
+ randomly turns a ball clockwise or anti-clockwise by some degrees
+ does it Every few seconds
+ Clockwise is max degrees the ball will turn clockwise
+ Anti-clockwise is max degrees the ball will turn anti-clockwise
+ Sync to keep Clockwise and Anti-clockwise same to turn equally likely in both directions
+ Speed
+ randomly speeds up or slows down a ball
+ does it Every few seconds
+ Brake + how much to slow down each time
+ Accelerate + how much to speed up each time
+ Sync to keep Brake and Accelerate same for equally likely speed changes
! Use Turn and Speed together to make ant / worm like crawling movements :)
+ "Go to the ant, thou sluggard; consider her ways, and be wise.."
- Proverbs 6:6-8, The Bible.
+ Teleport
+ randomly moves the position of a ball by some distance
+ does it Every few seconds
+ upto a Maximum distance
+ Turn On / Off drawing of ball Position, Heading and Trails
+ Theming of GUI possible by editing globals file
+ on Windows its factory/globals
+ on GNU/Linux its /usr/local/share/din/factory/globals
+ on Apple Mac OS X its Applications/DIN Is Noise.app/Contents/Mac OS X/factory/globals
- DIN Is Noise 30
+ auto split boxes in mondrian
+ auto delete boxes in mondrian
+ can do both at the same time
+ browse selected balls using arrow keys
* optimised note and N x N grid creation on Mondrian
* one box per frame
* optimised delete all boxes
* one box delete per frame
+ warper plugin maps bounding box of input curve to target
+ instead of mapping on XY space to another
+ works better for classical as well as shapeforms
* 9, 0 to decrease/increase points of note polygon
* SHIFT + 9, 0 to decrease/increase radius of note polygon
+ sine/cosine editor has plugin support
* reorganised countries
* reorganised waveforms library
+ can make install on GNU/Linux
- DIN Is Noise 29 is Free Software
- under GPL 2.0 for GNU/Linux
- released in Chennai, India on September 8, 2017
* Please dont use this code to build binaries for Windows or Mac OS X *
* I sell licenses for those binaries to barely support myself *
* Please consider funding my independent work on DIN Is Noise > http://dinisnoise.org/fundin/ *
- !fixed crash! when moving whole curve on the curve editor
- introduced in DIN28. not in earlier versions.
- !new! mouse slider
- activate by just clicking on a spinner's name.
- most spinners everywhere qualify:
- menu, plugins
- even settings screen
- try changing the key note while making sounds on your chosen instrument :)
- works well on Microtonal Keyboard & Mondrian
- note: some spinners are disabled, nothing happens when you click them.
- change the value of the spinner by simply moving the mouse along the mapped axis: X or Y [can be both too, see below]
- you can attach multiple spinners to the mouse slider and change the value of multiple parameters at the same time!
- just shift+click to add a spinner to the mouse slider
- shift+clicking doesnt activate the mouse slider yet.
- the attached spinner turns green
- detach the already attached spinner by shift+clicking on it again.
- the detached spinner reverts to red
- to launch the slider just click ie dont press shift on the last spinner
- with multiple spinners on the mouse slider, movement along both X and Y can change the values of appropriately mapped spinners.
- to stop the mouse slider just click or press ESC.
- changing the axis assigned to a spinner is not possible in this release
- things to try:
- make a group of drones
- select
- FM and AM depth spinners or
- FM and AM BPM spinners
- or all of them at the same time :)
- FM mapped to X
- AM mapped to Y
- move along X, Y to do visual drone FM, AM!
- select these drones and launch drones from them: Menu > Drone tools >Launch
- select Change velocity and Rotate velocity spinners
- move along X to rotate velocity
- move along Y to increase/decrease velocity
- loud crazy action :)
- play with drone life times:
- Menu > Drone tools > Select launchers
- Menu > Drone parameters > Change lifetime
- move in X!
August 1, 2017:
! Released DIN Is Noise 28 as Free Software !
+ freeze / thaw moving drones
- j to freeze/thaw selected moving drones
- or Menu > Drone Tools > Freeze, Menu > Drone Tools > Thaw
- tip: try on visually modulating drones, combine with k ie snap drones to notes :)
- shift + h to toggle auto-select launched drones
- for easy freeze/thaw of launched drones
- tip: select the launchers first (Menu > Drone Tools > Select launchers) and then shift + h.
- possible from menu too.
+ animated slits in Mondrian
- select slits
- g to toggle selection target between balls and slits
- or from menu, change Selection Target
- other selection short cuts same as short cuts for ball selection
- l - to select all slits
- k - to select slits of box
- i - to invert selected slits
- n - to clear selection
- when no slits are selected and an operation requires a slit [say, toggle animation or change slit open/close time], DIN selects slit under cursor.
- all possible from menu
- animate slits
- h to toggle animation
- INSERT / DELETE keys to decrease/increase slit open/close time
- all possible from menu too.
* keyboard shortcut changes to microtonal-keyboard
- l, i targets drones on microtonal-keyboard just like l, i targets balls or slits in Mondrian.
- l to select all drones
- l was orbit selected drones
- now its F4
- i to invert selected drones
- i was pitch/volume info display
- now its shift + i
- or click i on bottom of microtonal-keyboard
- j to toggle freeze/thaw selected moving drones
- or Menu > Drone Tools > Freeze, Menu > Drone Tools > Thaw
- k to snap drones to notes
- was Show Anchors, now from Menu > Drone Parameters only
* just click + move mouse not drag to edit vertex/tangent in curve editors
* just click + move mouse not drag on all sliders and sine mixer levels
* fixed ball color due to Mondrian > Menu > Clear Modulations
* click + move mouse not drag to move blue triangle to set sustain on keyboard-keyboard attack
* rearranged microtonal-keyboard menu
- new Voice menu
- new Drone_Tools menu
- new Drone_Parameters menu
- new select launchers command on menu to select drone launchers
+ vanity command uptime to print the amount of time that DIN has been running
- eg., 1 hour 29 minutes 58 seconds
+ new patch called harmonics to animate harmonics of sine mixer
- load-patch harmonics
- set harmonics {0 1 2 3} ;# first 4 harmonics will be animated
- set harmonics [get-nums 0 19] ;# all harmonics
- set harmonics [get-nums 1 19 2] ;# odd harmonics
- set harmonics [get-nums 0 19 2] ;# even harmonics
- set duration 0.1 ;# 1/10th of second
- set amount 0.01 ;# amount to animate each chosen harmonic every duration
- set anim 1 ;# 1 - start anim, 0 - stop anim
- MIDI sliders 1-20 assigned to 20 harmonics
+ set-var location { @ Place, Country}
- eg., set-var location { @ Chennai, India}
- eg., set-var location { @ Medellin, Colombia}
------------------------------------------------------------------------------
March 24, 2017:
+ Released DIN Is Noise 27 as Free Software
+ Release notes: https://workflowy.com/s/JbPNTNeifj
December 25, 2016:
+ Released DIN Is Noise 26 as Free Software.
+ Full list of changes coming soon.
September 13, 2016:
+ Released DIN Is Noise 25 as Free Software
+ See release notes for DIN Is Noise:
https://workflowy.com/s/JbPNTNeifj
November 22, 2015:
+ Released DIN Is Noise 10 as Free Software
....
....
....
May 16, 2013:
+ 'i'm still evaluating.'
+ correct update of show pitch/volume on microtonal-keyboard checkbox
+ L delay duration field to change left channel delay duration
+ R delay duration field to change right channel delay duration
April 6, 2013:
+ added a button to fold/unfold the console
- removed keyboard shortcuts for changing attack_time, decay_time
! parameters are always visible on the keyboard-keyboard
March 6, 2013:
!!! wip din-5.0 !!!
FIX order of init of variables
FIX decay_start_volume init on keyboard-keyboard
NEW authors_note as eval notice
FIX remove inital mesgs to console from din.cc
October 1, 2012:
!!! din-4.3 !!!
!!! factory reset required for upgrade from *any* version:
see http://dinisnoise.org/faq/#factory !!!
NEW filled_button - a button that is filled with some color (part of
GUI library) - used on parameter sliders (see below)
NEW created parameters dialog for keyboard-keyboard. visually edit
attack time, decay time, pitch bend & note volume!
to operate slider, left-click on the slider and mouse-move to
change value
NEW right-click on parameters titlebar and mouse-move to move the dialog.
right-click again to drop!
NEW min/max dialog for editing parameter limits.
click on the filled button at the left of a parameter slider to
show/hide min/max dialog
NEW set-var commands for din variables attack_time, decay_time,
pitch_bend and note_volume also updates the GUI.
eg., set-var attack_time 0.15 ;# updates attack_time slider
set-var decay_time 5 ;# updates decay_time slider
set-var pitch_bend 50 ;# updates the pitch_bend slider
NEW on exit, din waits until all launched keyboard-keyboard notes have faded out
NEW tweaked parameters of keyboard-keyboard and gave better defaults.
BUG resize screen and parameters dialog may disappear; workaround:
resize to last good size.
FIX click or ALT+F4 on window close button doesnt quit din. must quit
thru ESC, ESC again.
September 25, 2012:
!!! din-4.2.1
!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
FIX phrasor continues playing on microtonal-keyboard when instrument is keyboard-keyboard
September 21, 2012:
!!! din-4.2
!!! factory reset required for upgrade from *any* version:
see http://dinisnoise.org/faq/#factory !!!
NEW voice, gater & delay fade in/out at start, during operation & at exit.
NEW auto-fold the console during verbose parameter change (FM/AM depth/bpm etc)
*** tweaked the compressor & delay feedback/volume curves for better defaults
September 18, 2012:
!!! din 4.1 !!!
!!! factory reset required for upgrade from *any* version:
see http://dinisnoise.org/faq/#factory !!!
NEW Compressor checkbox on microtonal-keyboard & keyboard-keyboard
NEW show names of donors to the DIN is Noise project on the ticker
September 2, 2012:
!!! wip: 4.1 !!!
FIX font definition with y > 0 for correct positioning of ui elements like buttons, checkboxes etc.
FIX pushed the ticker down to the bottom
FIX start resolution is 800 x 600 instead of 640 x 480. done in 4.0, forgot to note in CHANGELOG
August 31, 2012:
!!! din-4.0 !!!
NEW Donate button and a ticker message - sorry folks, lost my patronage and my situation is dire :(
FIX click and release on button triggers click on the button instead of just click
August 30, 2012:
!!! wip: din-4.0 !!!
NEW drones fade in and out on din load/exit!
NEW drones fade in on creation!
NEW drones fade out on delete!
NEW visually move the sustain on attack editor on keyboard-keyboard
NEW sustain saved with attack curve library
FIX proper onion skin toggling on all editors
August 8, 2012:
!!! wip: din-4.0 !!!
FIX notes that were bent stay bent when new note is launched
NEW save/reload mouse position on keyboard-keyboard for better mouse based pitch bending
NEW save/reload of number of trail points & handle size of all drones
May 14, 2012:
!!! wip: din-3.6 |||
FIX data files stored in /usr/local/share/din instead of /usr/local/var/din
NEW change the trail size of each drone (+ and -), selected drones or all drones
NEW change size of a drone (9 & 0), selected drones or all drones
May 08, 2012:
!!! din-3.5 !!!
+++ save/load variable delta_bpm
*** INTERNAL: moved SAMPLE_DURATION calculation to audio_out::set_sample_rate
*** INTERNAL: revised console.h/.cc
*** INTERNAL/FIX?: moved console text color constants to main.cc
FIX MIDI connnected to MIDI connected in audio.cc - thanks Ian Morrison
NEW drone trails! press + and - on microtonal-keyboard to increase & decrease trail length
NEW drone handle size - press 9, 0 on microtonal-keyboard
NEW press o on curve editor to overlay din microtonal-keyboard or keyboard-keyboard on the curve editor
useful for editing drone modulation curves and watching the drone modulation shapes change
FIX memory leak on keyboard-keyboard when fully decayed notes are removed
NEW mouse driven pitch bend on keyboard-keyboard! move mouse either side
of dotted vertical line to pitch bend. pitch bend applies to
all notes. to zero pitch bend bring mouse back to the dotted
line. change pitch bend amount from command mode:
set-var pitch_bend 100 ;# upto 100 hz
sv pb 100 ;# short form
mouse driven pitch bend overrides MIDI driven pitch bend. use one or the other :)
NEW variable trail_length for drone trail lengths:
set-var trail_length 10 ;# trail has 10 points
sv tl 10 ;# short form
can also be set from the ui as listed above
NEW din.desktop and din.png files to help packagers (look in ~/.din/data)
April 17, 2012:
!!!! din-3.0 !!!!
!!!! factory reset required for upgrade from *any* version: see
http://dinisnoise.org/faq/#factory !!!!
+++ visual drone modulation +++
+++ j - toggle modulation target: voice or drones
+++ y, u - decrease/increase FM depth of selected drones or all drones
or the lead voice when there are no drones.
+++ r, t - decrease/increase AM depth of selected drones or all drones
or the lead voice when there are no drones.
+++ F7, F8 - decrease/increase FM bpm of selected drones or all drones
or the lead voice when there are no drones.
+++ F9, F10 - decrease/increase FM bpm of selected drones or all drones
or the lead voice when there are no drones.
+++ press 3 on microtonal-keyboard to edit the drone modulation curves
pink for AM
cyan for FM
+++ automagically save and load modulation on drones
+++ k - toggle drone anchor drawing
+++ smoother increase / decrease of drone master volume
March 4, 2012:
!!!! din-2.0 !!!!
!!!! factory reset required for upgrade from *any* version: see
http://dinisnoise.org/faq/#factory !!!!
+++: quantise bezier curve pattern generated by morse-code
command to n beats:
morse-code sos ;# quantise to 1 beat (default)
morse-code sos 2.5 ;# quantise to 2 and half beats
mc sos 3 ;# short form; quantise to 3 beats
;# the bezier curve pattern is on copy curve
;# just paste (LCTRL + v) on any curve in any curve editor
+++: detect when a MIDI device connects or disconnects with din
+++: press keys on the MIDI keyboard and launch notes. support from
C-1 (MIDI note on # = 0) to G9 (MIDI note on # = 127).
+++: support for retuning intervals, velocity curves and pitch
bending.
fix: fixed decay failure when note volume at start of decay is -ve
February 11, 2012:
!!!! din-1.9.5 !!!!
!!!! factory reset required for upgrade from *any* version: see
http://dinisnoise.org/faq/#factory !!!!
fix: shoot of volume when sustain is larger than x value of last vertex on attack
curve!
+++: add new variable auto_connect_outputs to control if din will
auto connect its output to system audio outputs. yes by default.
set-var auto_connect_outputs 1 ;# auto connects next time din starts
sv aco 0 ;# short form; disables auto connect
***: reworked (yet again) the result handling of Tcl interpreter
January 15, 2012:
!!!! din-1.9.4 !!!!
***: changed curve-value command to retain existing x or y values of a vertex or tangent position.
***: rewrote the result handling of Tcl interpreter
December 22, 2011:
!!!! din-1.9.3 !!!!
!!!! factory reset required for upgrade from *any* version: see
http://dinisnoise.org/faq/#factory !!!!
+++: new changer patch to automagically change the key of din every
n seconds
fix: fixed Bus Error / Segmentation fault due to bad result clearing
in the Tcl interpreter.
December 08, 2011
!!!! din-1.9.2 !!!!
!!!! factory reset required for upgrade from *any* version: see
http://dinisnoise.org/faq/#factory !!!!
fix: size of boxes in keyboard-keyboard is constant irrespective of
note volume
+++: added new variable delta_time
set-var delta_time 0.1 ;# 1/10 sec delta
delta_time is used for changing attack and decay time thru their
keyboard short cuts ie attack time & decay time change in
delta_time steps.
November 27, 2011:
!!!! din-1.9.1 !!!!
!!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!!
fix: version number on title bar matches version number of din.
fix: immediately insert vertex when there is only one curve in a curve editor
fix: immediately draw scratch curve when there is only one curve in a curve editor
fix: doesnt enter command mode when ALT + TAB is pressed
***: changed name of din board to microtonal-keyboard
+++: new keyboard short cuts for attack time & decay time on keyboard-keyboard
+++: f11, f12 to change octave shift bpm on microtonal keyboard & keyboard-keyboard
+++: SPACE to toggle delay on keyboard-keyboard
***: changed waveform of keyboard-keyboard from sine to the waveform on microtonal-keyboard.
***: LALT -> SPACE on sine composer to avoid clash with ALT + TAB
November 16, 2011:
!!!! din-1.9 !!!!
!!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!!
fix: disabled exit Tcl command that quits & crashes din
fix: disabled application of sine harmonic composer output to non waveforms (ie gater patterns, fm/am patterns etc)
+++: added 33 new Bezier curve waveforms to the waveforms library
+++: added display of Fast Fourier Transform (FFT) of Bezier curve waveforms
+++: added display of samples for 2 cycles of a waveform at a particular pitch
***: labelled the octave shift patterns & added a new octave shift pattern (snap-4th)
***: can now toggle sine harmonic composer, fft and samples display (see curve_editor.hlp) on waveform editors
November 6, 2011:
!!!! din-1.8.6 !!!!
!!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!!
fix: saved & restored note-volume
+++: separate waveform (ie oscillator) for voice on din board & voices on keyboard-keyboard
+++: added new waveforms to library. beziered pulse (with different duty cycles) & saw waveforms
+++: added attack & decay patterns library
+++: midi clock sync & midi start messages syncs bpm components
***: optimised solver (see solver.cc)
October 29, 2011:
!!! din-1.8.5.0 !!!
!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
+++ keyboard-keyboard
press a key to play a note
keys of the computer keyboard mapped to notes of the scale over a
range of 3 octaves
*** reassigned curve editors for keyboard-keyboard
!fix! bezier curve solver returns upper y when slope is infinity (returned lower y prior)
October 5, 2011:
!!! din-1.8 !!!
!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
*** optimised visible range calculation when scrolling on din board
+++ added shrutis.tuning -- divides the octave into 22 intervals
based on the Indian classical music tradition.
tuning set shruti ;# load shruti tuning
+++ color coded text messages to the terminal.
--- removed unlimited resonators due to complexity in editing & management;
now there is only 1 oscillator ie waveform to voice the lead sound.
--- removed channels response due to complexity in editing & management
volume of waveform is determined by height of the mouse in playing area -
@bottom volume is 0; @top volume is wave_volume (see variable wave_volume below)
+++ added variable wave_volume to set waveform volume ie oscillator volume:
set-var wave_volume 0 ;# mutes voice (also by pressing SPACE on din board)
set-var wave_volume 1 ;# max volume - will be *very* loud
set-var wave_volume 0.125 ;# default volume
set-var wave_volume 2.8 ;# crazy volume accepted (ie not clipped)
set-var wave_volume -1 ;# negative volume accepted but will invert waveform
--- removed strength & channel editors due to removal of resonators & channels response concepts.
*** changed curve editor assignments due to removal of above editors
press F1 on din board to see new assignments
--- removed stereo gaters due to complexity in editing & management.
now there is just 1 gater (called gr) applied to L & R
*** the lead voice is now mono
*** the drones have always been mono
*** the delays remain stereo
September 8, 2011:
!!! din-1.7.3 !!!
!fix! segfault due to undefined order of initialisation of global variables on some versions of g++.
August 23, 2011:
!!! din-1.7.2 !!!
*** revamped start-end patch to support multiple MIDI #CC assignments
*** in command mode, type help start-end or read the file ~/.din/start-end.help.tcl for complete information.
August 19, 2011:
!!! din-1.7.1 !!!
!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
+++ parameter limit labelling on all curve editors
+++ beat/value marker with realtime update on all beat/value editors (gater, modulation & octave_shift)
*** improved default octave shift pattern
!fix! recompute visible ranges after resizing a range
August 17, 20011:
!!! din-1.7 !!!
!!! factory reset required for upgrade from *any* version: see http://dinisnoise.org/faq/#factory !!!
*** din audio output range is 0.1 Hz to infinity Hz.
+++ num-octaves command
num-octaves 4 ;# span current scale to 4 octaves
num-octaves 28 ;# span current scale to 28 octaves
preserves existing drones & range size mods
+++ current octave labelling
+++ cursor info mod (absolute volume printed at all times instead of 0 under playing area and 1 above playing area)
+++ key note colored green on all octaves
+++ save/reload drone phases
July 26, 2011:
!!! din-1.6.6 !!!
!!! factory reset required if upgrading: see http://dinisnoise.org/faq/#factory !!!
!fix! more accurate selection of drones (inbox selection instead of radial selection)
+++ new variable delta_bpm (or dbpm); gater bpm changes by delta_bpm for each f9/f10
eg., set-var delta_bpm 5 ;# increases/decreases bpm by 5 beats for gaters, am, fm & octave shift modules
+++ new variable drone_handle_size (or dhs)
eg., set-var drone_handle_size 14 ;# default is 7; doubles the size of the drone handles
*** f9/f10 - decreases/increases both gaters bpm at the same time.
*** lshift + f9/f10 - decreases/increases left gater bpm ie gl
*** lctrl + f9/f10 - decreases/increases right gater bpm ie gl
*** improved handling of gater bpm change and fm/am depth change
July 20, 2011:
!!! din-1.6.5 !!!
!!! factory reset required if upgrading: see http://dinisnoise.org/faq/#factory !!!
!fix! segmentation fault when opening window on ATI/Intel graphics cards
*** sine -> waveform key shortcut changed to left_alt instead of right_control
July 3, 2011:
!!! din-1.6.4 !!!
--- removed dependency on SDL
+++ optimised mouse, keyboard & OpenGL handling using Xlib. din is now an X11 application.
*** restored drone master volume to default instead of 0 ie quiet
June 11, 2011:
!!! din-1.6.3 !!!
!!! factory reset required if upgrading: see http://dinisnoise.org/faq/#factory !!!
*** optimised mouse capture
--- removed FFT on waveform; no dependency on FFTWF library anymore
*** faster startup (no FFT wisdom calculation) & performance (no FFT calculation waveform edit/change)
!fix! clear drones when scale changes
May 28, 2011:
!!! din-1.6.2 !!!
!!! factory reset required if upgrading !!!
*** silence drones when drones loaded to avoid shock volume change.
*** fixed volume variable to go from 0 to 1 instead of 0 to 0.99xxx
*** added interval check (clamps to 1 to 2) in tone ranges
+++ 2600.patch.tcl : google insight banned words -> morse code -> music.
--- removed superfluous feedback/volume setting from delay.cc/h code
!fix! drones not resizing/repositioning when range size changed with LCTRL + mouse move
*** reordered keyboard handling in din::handle_input (..)
May 16, 2011:
!!! din-1.6.1 !!!
!!! factory reset required !!!
+++ new volume variable accesible in Tcl interpreter; goes from 0 to 1
*** changed start-end.patch.tcl to allow use of mouse or midi slider to go from start/end and apply command
+++ added drone_master_volume to possibilities for going start->end
+++ cursor info display shows frequency & volume
+++ show_frequency variable change to show_cursor_info
+++ din irc bot video
May 9, 2011:
!!! din-1.6 !!!
+++ new patch start-end to go from a start to end value and execute a command for each inbetween value
+++ see start-end.patch.tcl & start-end.help.tcl for more information
May 1, 2011:
!!! din-1.5.9 !!!
--- gaters command. gaters state stored in din_info
*** oscilloscope colors saved on exit
*** renamed short name of some commands
April 17, 2011:
!!! din-1.5.8.0 !!!
+++ get-beat <list of components> [all|first|last]
+++ get-beat fm all returns current beat, first beat and last beat of fm
+++ get-beat am first returns first beat of am
*** frequency display switches correctly between phrasor cursor & mouse cursor
*** lop alias load-patch, lp alias list-patches & asd alias assign-drones in droner
+++ [ & ] keys for decreasing, increasing phrasor jog
+++ i to toggle display of frequencies on notes & under mouse cursor
April 6, 2011:
!!! din-1.5.7 !!!
+++ timenow variable contains time elapsed in seconds from din start
+++ loop procedure to run user defined Tcl code at every din loop
proc loop {} {
;# this runs every din loop
echo $timenow ;# just print number of seconds elapsed since din start on console
}
+++ list-patches command to list patches
+++ load-patch command to load a patch
+++ picth intervals as vars eg., $1, $2b, $3b, $3, $4, $5b, $5, $6b $6, $7b, $7 & $8
+++ piano notes as vars eg., $C, $Db $D, $Eb, $E, $F, $Gb, $G, $Ab $A, $Bb $B. $C is 261.626, $A is 440
*** doesnt select sine composer and/or fft levels on curve editor when curve edit is in progress
+++ documentation for most of din commands
April 1, 2011:
!!! din-1.5.6 !!!
*** completely optimised for JACK instead of compatibility with both OSS and JACK.
*** see revision 2201 at http://code.google.com/p/din/source/detail?r=2201 for more information.
March 29, 2011:
!!! din-1.5.5 !!!
*** octave shift is faster (we shift once every audio out like before but we dont find shifts per sample) and more accurate (no floating point drift)
*** the beat of fm, am, gaters always progresses (am_vol/am_depth/fm_depth & mouse height determines their use in sound)
*** changed octave_shift curve name from octave_shift to os for easier handling on the command line
+++ added 2 patterns to octave shift library
!fix! fixed bug in solver::operator (float x) --> (see din-1.5.5/src/solver.cc)
March 28, 2011:
!!! din-1.5.4 !!!
+++ added variable jog for phrasor jogging
+++ set-var jog 3 ;# default jog
+++ set-var jog 30 ;# warp speed jog!
+++ sv j 30 ;# short form
+++ get-var jog ;# returns jog value
+++ gv j ;# short form
+++ left_alt + enter resets taptarget bpms ie equivalent to command set-now $taptarget 0 --> used to match beat of external sounds
+++ added configure.ac check for tcl.h in addition to tcl8.5/tcl.h
*** optimised beat2value.cc/h that drives the gaters, fm, am & os
*** bot is insecure to allow full remote operation of din.
*** bot will connect to password protected irc channels only.
!!! use it among friends. not enemies !!!
*** bot always connects at your command (see din-1.5.4/src/bot.cc & din-1.5.4/include/bot.h)
March 25, 2011:
!!! din-1.5.3 !!!
*** factory reset required, see http://dinisnoise.org/faq/
!fix! fixed compressor response when input audio sample hits xmax boundary - stays at max instead of going to min
!fix! get-drone command and ~/.din/droner.tcl
+++ display name of jack connection on din title bar
+++ new variable show_frequency to toggle frequency display under mouse and frequencies of notes of the scale
+++ set-var show_frequency 1 ;# displays frequency under mouse & frequency of all notes in all the octaves
+++ set-var show_frequency 0 ;# hides frequency under mouse & frequency of all notes in all the octaves
+++ set-var sf 1 ;# sf is short for show_frequency
+++ sv sf 0 ;# sv is short for set-var; sf is short for show_frequency
+++ din saves show_frequency state when it quits and restores it when you start din again
*** tweaked ~/.din/scoper.tcl to allow easy entry of midi slider/knob values
*** documented ~/.din/2600.tcl
--- oss midi support & other unused procs in ~/.din/init.tcl
March 20, 2011:
!!! din-1.5.2 !!!
*** factory reset required, see http://dinisnoise.org/faq/
+++ can specify number of samples used to construct the profile curve in sine harmonic composer (was 100 samples).
+++ set-var num_sine_samples OR nss, get-var num_sine_samples ORR nss
+++ ' and \ keys in waveform editor to decrease/increase num_sine_samples 1 at a time
*** use large number of samples to accurately profile a curve that has large number of harmonics
*** experiment with num_sine_samples to change timbre
+++ save/load vertex labelling on curve editors
March 14, 2011:
!!! din-1.5.1 !!!
*** factory reset required, see http://dinisnoise.org/faq/
+++ constant size vertex/tangent handles in all editors
+++ initial handle size specified in ~/.din/globals
+++ vertex labelling in all editors
+++ press l in an editor (but *not* on a curve vertex/tangent cos thats for making curve linear) to toggle
+++ scales can have an unlimited number (previously 16) of notes, hence an unlimited number of ranges (previously 64)
!!! din remains a 3 octave instrument !!!
*** set-bpm <list of components> <list of bpms>, get-bpm <list of components>
+++ set-now <list of components> <list of nows>, get-now <list of components>
+++ get-drone selected, set-drone <list of drones> <list of volumes>
*** droner.tcl to support microtonal chord progressions via MIDI
--- removed mouse interpolation
--- reinstated original subdivision for curve generation as new subdivision scheme
introed in din-1.5 doesnt work for octave shift (will revisit)
+++ delete-disabled-resonators command updated to allow all resonators to be deleted
*** optimised resonator picking and disable/enable/enable all
--- removed curve_editor::randomise (..) and rnd_miny_maxy --> unused feature
!bug! deleteing all resonators when mouse capture is applied crashes din (segmentation fault)
!bug! unpredictable curve loss when moving curve in strength editor (segmentation fault on quit)
February 15, 2011:
!!!! din-1.5 release !!!!
!fix! mirroring tangents caused 1st subdivided point to lie on the curve so no further subdivision hence no profile.
!fix! midi ring buffer deallocation in audio::alloc
+++ mouse x, y interpolation for click/tick/glitch free sound on long periods
+++ midi-pitch-bend, midi-program-change support (thanks Peter Nelson - http://fuzzle.org/~petern/)
+++ experimental get-selection command to get selected items from current curve editor
+++ can create, edit and remove drones while phrasor is playing a phrase
+++ tonex, toney for finding tone on din board
*** midi_cc -> midi-cc, midi_note_on -> midi-note-on, midi_note_off -> midi-note-off, midi_clock -> midi-clock, midi_start -> midi-start
*** changed scoper.tcl, midimap.tcl, 2600.tcl
--- removed curve_editor::scale ()
+++ <cstdlib> to bot.cc
+++ add sample_rate change callback.
+++ add buffer_size change callback altho we dont support buffer size change in din. would require a restart.
*** optimised malloc in JACK MIDI.
February 9, 2011
!!!! release: din-1.4.3 !!!!
!!!! factory reset required. see http://dinisnoise.org/faq/ for more information.
!++! fps, usleep vars to bring down CPU usage (thanks Peter Nelson - http://fuzzle.org/~petern/)
!++! full JACK MIDI support (thanks Peter Nelson - http://fuzzle.org/~petern/)
!--! jettisoned RtMidi support -> tagged in svn for din-OSS use.
!--! no requirement of alsa sound library hence din is fully cross-platform. porters rejoice!
+++ <space> to mute/unmute resonators @ din board.
+++ marked the low (1-, 2b-, 2-, 3b-, 3- etc) & high octave (1+, 2b+, 2+, 3b+, 3+ etc) on din tone board
+++ changed set-bpm command to accept multiple bpm targets and values
+++ changed get-bpm command to print bpms of multiple bpm targets
+++ changed set-var command to accept multiple vars and values
+++ changed get-var to print values of multiple vars
+++ undo-redo on curve editors does undo-redo of window position too
+++ save-restore exact din board position, oscilloscope position
+++ better default view of din board showing key note when launched for 1st time
+++ new vars zoom & pan added to control zoom and pan variables in curve_editor
+++ scroll, zoom & pan now loaded from settings.tcl instead of din_info
*** midimap.tcl sourced in init.tcl for default midi_cc, midi_note_on/off, midi_clock & midi_start
*** tweak of handle sizes in curve editors for easier editing for new user
!fix! load-resonators doesnt fail when resonators file doesnt exist
!fix! default resonator strength is simple linear curve instead of bezier curve for easier initial editing.
!fix! tangents dont mirror by default in drone editor
January 27, 2011:
++ add resonator with <left shift> + r in strength editor.
-- removed resonator::MAX_RESONATORS - add as many resonators as you like
++ delete-disabled-resonators Tcl command
++ new hires clock
** mark curve segments in curve_editor
** list_resonators -> ls-resonators command name change
** editor name change: morse_code -> morse-code
!fix! add drone clears selected drones
!fix! oscilloscope not selected when selecting drones
!fix! configure.ac now checks for OpenGL, Tcl, libircclient & libasound2
January 21, 2011:
!! release: 1.4.1 !!
++ ultra drone editing - multiple drone creation, moving around the board and delete
++ infinite volumes - change height of the keyboard to get as many volume levels as you like.
++ integrated jack/oss into same code base
January 14, 2011:
* infinite volumes - change the height of the infinite keyboard to get as many volume levels as you like
January 13, 2011:
* integrating jack/oss api in same code base
January 10, 2011:
* din-1.4 : first release into the wild
* fast multi bezier curve (ie multi_curve) solver with infinite points and bezier curves
* WIP: new website design @ dinisnoise.org
December 30, 2010:
* bot uses safe interpreter when connected to irc channel
December 29, 2010:
* esc 2 times from din board to quit din -- waits for ESC_WAIT (1.25 seconds between ESC presses).
* fixed oscillator_strength marker display, default globals tuning file spec and default din_info
December 28, 2010:
* set_bpm --> set-bpm and other commands names changed. no underscore, use hypen instead to separate command words in a command name - easy to type.
+ added equivalent help files
December 27, 2010:
* fixed key repeat speed bug when MIDI is on
* tweaked the jag font
* WIP: infinite curve points, infinite resonators ---> not adequately tested; @alejo: dont package
December 16, 2010:
* help.tcl, set_text_color to set console text color, faster command lookup from command list
December 15, 2010:
* help for commands is via help.tcl script -- we will use this script to also produce command reference documentation
at dinisnoise.org soon.
December 11, 2010:
* bot:
* disabled exec command from Tcl interpreter when bot connects to irc. exec enabled again when bot disconnects.
* new disconnect subcommand with custom disconnect message. eg., bot disconnect message
* key: command changed to print nearest note name (eg., key note) & value (eg., key value).
* scale: new scale command. list, get, set, add, remove & find are subcommands. eg., scale set major
* tuning: new tuning command. list, set & get are subcommands. eg., tuning set et
* bpm: new bpm command. list, set, get, reset, style (set & get subcommands) are subcommands. eg., bpm set fm 240
* delay: new delay command. set, get are subcommands. list coming soon. delay set {l r} 5000 ;# sets delay time of both channel to 5 seconds.
* taptarget variable to control what component (gl gr fm am or os) gets affected when tap bpm is used. eg., set taptarget {gl gr}
* console: stays in command mode when TAB pressed until ESC or TAB is pressed again. used to leave command mode when ENTER was pressed.
* BUGFIX: delay haywire fix when delay time is 1 second ie 1000 msecs.
November 30, 2010:
* bot input/output is queued and processed in input loop
* |BUG| fix multi line output of commands to IRC. no lines sent.
November 24, 2010:
* tonic limited to 40 to max_frequency possible in given sample rate
* display key and completion of octave shift --> since octave shift is general we call it modulating up/down instead of octave up/down.
October 11, 2010:
@oss:
!!!after 4 years figure out that ive been calculating everything in the audio thread. so no matter how fast a processor we have, calculations cant be performed faster than
the rate at which the audio thread is called. fixed this at least now. this opens the way for the power of multi-core processors & GPUs.!!!
***tcl interp back in main thread***
---removed command scheduling in console as tcl interp is back in main thread ---
***viewport struct changed, creates default or restores last viewport on constructor ***
***audio_out::write changed to accept audio buffer to read for writing from main thread ***
++++++
concept of a bunch of audio buffers in main thread that is filled continously one after another.
give a written buffer when audio thread wants one. important to keep a good number of audio buffers but not too many
so that main thread is not writing the same buffer the audio thread wants to read. if all buffers are written
but none read so far, main thread will stop writing anymore and wait for audio thread to read some.
++++
***better commenting and messages on shell console***
September 29, 2010:
@@@ sort of back in the groove again.
@@@ wip though as trying to have 1 Tcl interpreter in audio thread for accessing samples later
[!!!] FIXED resizing window
[!!!] FIXED abrupt level change when moving from editors back to board
[+++] can continue to play with the mouse when in command mode. tracks cursor in editors.
September 12, 2010:
+++ get_scope/set_scope, get_drone/set_drone and scoper.tcl, droner.tcl
August 05, 2010:
[***/+++]: midi command fleshed out with list, open, close options.
[+++]: midiopenall, midicloseall tcl cmds available for one-shot open/close of midi input devices
[+++]: midimapper.tcl - displays midi output on console. to invoke issue command: scr midimapper
August 03, 2010:
[mod] param value messages on the console
[bug] segfault on load_scale of bhoopali - couldnt recreate!
July 31, 2010:
*** back to working on font again
***changed set_font_size to change cell size, char spacing & headroom
***get_font_size simply prints 4 numbers
***created help files of set_font_size & get_font_size
***changed save_settings.tcl to include font size params so we dont save them in the font file itself. this is good.
July 30, 2010:
!+++! tap bpm, set taptarget {gl gr fm am os}. change taptarget to change whose bpm is affected.
eg, set taptarget {fm am os} only sets fm, am & octave shift bpm to tapbpm.
July 28, 2010:
*** worked on timing of keypress (keypressedd(..) in input.h)
July 27, 2010:
!fix! western notation display didnt update correctly when key was set to a numeric value.
!fix! no overwriting of console command line
+++ wrap around of console command history
+++ notation saved into settings.tcl
+++ ~/.din/init.tcl for custom Tcl scripts to be loaded at startup.
+++ set_kb_layout/kbl <layout> command. kbl us sets to us layout. kbl uk sets uk layout.
July 23, 2010:
!!!check b4 din workshop at usurp gallery, london
*** will try to make a live cd with this version
+++ new sound patterns added (one, one-lr, two, two-1, three, many)
July 19, 2010:
!!!+++ experimental MIDI support using modified RtMidi library
!!!source ~/.din/midi.tcl after install; turn on gaters and move any sliders u have to change the gater bpm
!!!set min 0; set max 240; set which g ;# set which fm will change fm bpm.
July 18, 2010:
* Happy birthday to self! jag turns 35. a hub. a dad. not a millionaire. Only want to do what I do now at 40 - maybe also want to be more famous and print money.
*** phrasor optimisation, draw a red marker to id phrase start during a recording so its easy to finish at that point,
*** phrasor playback starts at beginning of last recorded phrase
!!! bug fix in phrasor when pausing doesnt leave mouse at the right note, these bugs introed because we move from absolute to relative mouse calculation
!!! bug fix no jump of mouse when phrasor is playing and u leave board to the editors and come back.
!!! test required.
July 15, 2010:
* changed name of waveform from noname to wave in file data/one - the one resonator file
* removed key get from key command its available as getv key
July 14, 2010:
+++set_curve_editor, get_curve_editor to place different curve editors on different screens.
July 11, 2010:
+++!!! din-1.1.2 - jack, oss (branch) support updated.
+++ delay feedback, volume curves, only time is value
*** fixed undo/redo/copy/paste bug on multi_curve
*** fixed morse code trailing spacings and morse code is now on copy curve to paste
+++ save_settings.tcl to save settings into ~/.din/settings.tcl which is loaded on next din start
June 03, 2010:
* din-1.1 RC.
* cleaned up documentation
* sa command is gone. tonic/key is substitute.
May 31, 2010:
+++ Tcl interpreter is the din command line.
+++ Oscilloscope fully moveable and resizeable.
+++ message announcing current curve editor
*** fixed note marking in strength editor
!!! Oscilloscope drawing optimised with single call to glDrawArrays instead of glBegin() ..glVertex3f..glEnd ()
May 18, 2010:
*** Tcl/Tk integration getting mature
!+++! experimental linebreaking and wordwrap added to console - disabled by default
+++ new variable sa so can do gv sa
--- removing tcl command - no longer required as Tcl/Tk interpeter is the din command line
May 15, 2010:
!+++! experimental tcl/tk integration.
+++ new tcl command - syntax tcl <tcl_command>
* this will let us script din with tcl and also make custom uis using tk.
+++ sa.tcl. to bring up ui, do tcl source ~/.din/sa.tcl
*** mouse capture replay doesnt warp the mouse, draws a cross indicating playback position.
May 13, 2010:
+++ morse code -> bezier curve -> waveform/am/fm/gaters/octave_shift
*** editable beizer curve based patterns for dot, dash, inner spacing, letter spacing and word spacing.
May 5, 2010:
+++!!!*** jack is now trunk
+++!!!*** oss is a branch https://din.googlecode.com/svn/branches/oss
*** oss is faster than jack but allows no collaboration.
+++ oscilloscope is back on jack
*** major renames of many files in din/data
*** optimised keyboard handling in curve_editor.cc/h, din.cc/h
*** new gater patterns, new octave shift patterns, tastier defaults
April 27, 2010:
!!! experimental jack support
+++ autoconnect to system:playback_1 and system:playback_2 ports to start playing audio
April 26, 2010:
*** optimised keyboard handling
April 25, 2010:
+++drones can be created to any tone. can be snapped to a note.
+++gaters on/off command
+++snap_drones var to setv/getv commands
sv snap_drones 0 or 1
gv snap_drones
+++reenabled the drone editor
April 23, 2010:
rc 1.0.6
++sa/key display on pressing ;
--drones are synced only on startup
**pfx changed to p in bot command
April 22, 2010:
prepping for version 1.0.6
+++bot::setset()
+++tests if bot is running when outputing mesg with it
***gate->g, gate-l->gl, gate-r->gr, all->a in set_bpm, get_bpm, set_style, get_style commands
April 18, 2010:
prepping for version 1.0.6.
+octave shift with controllable bpm and progress curve.
+octave shift editor (press 7)
+octave_shift.lib - library of octave shift progress curves.
*libircclient expected at /usr/lib/ and /usr/include/libircclient - need to change this to use pkg-config.
April 15, 2010:
* check b4 openlab opennight #4
* reworked solver so that custom min and max handlers can be used to get looping (in waveform) but ping-pong (in gaters, fm, am)
* inlined these functions but if they were not inlined then maybe slightly slower (nanoseconds? microseconds? testing needed)
* default is ping-pong on gaters, fm, am
April 12, 2010:
---removed multi_curve copy constructor and operator=, color and name restored after default copy.
***chrono uses <ctime> ie CLOCKS_PER_SEC and clock() for timing instead of sample based timing. can therefore use it for non-audio timing.
***mouse command changed for relative mouse movement instead of absolute positioning. making it selectable is a better goal.
!!!removed otransmit code in osc.cc and osc(..) removes timers as timer struct removed from chrono.h/cc. no problem for osc recieve.
***using SDLK keycodes in curve library handling in curve_editor.
!!!fixed bug in osc due to stringstream/tokenizer mixup.
April 5, 2010:
+++get_font_size command
+++xsize and ysize are cell width and cell height for font can be set independently
***updated set_font_size command to handle xsize and ysize
xxxhopefully fixed the font save bug - was writing a null character b4.
***updated cell_size code to prevent squash/stretch of font when varying its xsize and ysize***
April 3, 2010:
+++tokenizer.cc/.h - ditching stringstream
!!!font size bug still persists - do not use set_font_size command!!!
+++ircu.patch - patch for ircu irc server ircd undernet to allow messages to flood the channel
so that din can send and receive data freely without any limits.
march 31, 2010:
+++varun: happy birthday.
***+++ irc bot cleaned up, with doc
***fixed (assuming strongly) kerning and font size bug
---all .hlp files from data
march 25, 2010:
+++ added doc directory. will move all help files here in the future.
but its not ready yet. so we use help files in data.
+++ added mouse <x> <y> command, untested but no harm if not used.
+++ octave shift shortcuts changed to z and x due to keymap issue on non english keyboards. need to check this.
march 23, 2010:
$$$ work in progress: 1.0.5.1
*** enhanced sa command to apply octave modifiers to values not just note names. mouse warp toggle added too.
+++ added octave shift short cut [].
+++ brought am, fm, gate-l, gate-r parameters as keyboard shortcuts
+++ FIXED BUG: creating a drone outside the ranges didnt create the drone on the correct note.
*** using keycodes instead of characters ie SDLK_SLASH instead of / character to check slash so
that it works on all keyboards.
--- replaced din_help.txt with din.hlp.
march 20, 2010:
$$$ release 1.0.4.1.
*** if no audio, din continues to work. can edit resonators and drones.
*** better selection of drones.
+++ aout command to control OSS audio parameters. can also edit ~/.din/audio_prefs.
march 16, 2010:
!!!+++ ditched portaudio and moved to oss. portaudio was using oss anyway. with direct oss can set many audio buffer parameters.+++!!!
!!!testing required on this oss port!!!
march 12, 2010:
** made basic install of din easy such that its a gateway to explore more complex features of din.
+++ allow din board height to be changed allowing finer or coarser volume control.
march 08, 2010:
+ sine wave -> bezier curve: export sine wave generated with the sine_mixer as a bezier waveform. 100 vertices with folded tangents generated. a ui/command to reduce/control number of generated points desired.
+ bezier curve -> sine wave: import fft levels of a bezier waveform into sine levels and alter the drawn sine wave. only partially correct as it doesnt import phase information from the fft. works when phase is 0.
+ clear/erase harmonic by pressing 'c' over sine levels.
! use resonator names from file instead of resetting to default name/numbering.
+ current curve editor var in uis_t to keep track of the current curve editor so we can run curve commands on the console.
+ curve_name command to set the curve name. possible due to previous feature.
* worked on resonators in file: resonators, one
december 18, 2009:
** bug fixed: pan and zoom with shift+a/d and shift+q/e
november 20, 2009:
assigned curve names, save and load curve names when curves are loaded. default name is noname.
fixed bug: can change resolution of curves in modulation and gater editors.
november 13, 2009:
mouse position saved and restored on din board
TODO: but must be done for all ui screens and must also restore window position
november 11, 2009:
console rollup state saved/restored
removed numeric notation of ranges as it doesnt work for keys other than C. will revisit later.
november 9, 2009:
removed set_bg command - no range color filling, just plain looking ui. its the sound we are after.
notation support: indian (S r etc), western (C C# etc) and numeric (1 2b etc)
optimised solver.h/cc again to return last result when y cannot be solved for given x.
FIXED BUG: In console, if you clear text (press backspace), and rollup console - crash
fixed colors used for drawing ranges, phrasor position and drone makers
november 4, 2009:
*** cleaned up the trunk
!!! optimised the configure.ac and Makefile.am
+++ BUGS
october 15, 2009:
***marked position of phrasor when paused
october 14, 2009:
+++get_kern command to get character kerning in the font.
+++added {}`| characters to the font
october 10, 2009:
!!!!++++multicore support added
+++xset m 0 0 to reset mouse to zero acceleration and threshold when
din, and restore upon exit.
october 9, 2009:
!!! fixed ranga backdrop drawing bug
+++ added support for audio out via alsa dmix so that you could play
an audio clip in the background and play din over it.
*** preparing for release of din. version 1.
may 7, 2009:
+++fft.cc, fft.h - separated fft engine from curve editor
***worked on the resonators
may 6, 2009:
+++ added ability to move the mouse in curve editors with the keyboard
+++ vary the pan and zoom speeds